The Lighting you need... at Prices you'll go APE over...

Includes: 

4 Lights, Four pedal foot switch (auto run, sound active, freeze, blackout) with a 16 foot cord, 6 foot stand, T-bar that contains all the plugs for the lights and contains the controller with led display, Carrying case for T-bar and the 4 lights. Each light has an adjustable mounting bracket for independent mounting.

Features: 

Sound active with built in mic, 14 selectable preset programs, Auto-run (loops through built in programs), Master/slave, 7 different DMX modes for ultimate control. Change between auto run, sound active, freeze, blackout with foot switch controller.

Lux Readings at 1 meter for ONE HEAD only:

Foot Controller:

The foot controller is wireless and also comes with a 16 foot cable to make the controller wired. 

Switch #1 Auto Mode- Puts the lights into auto fade program

Switch #2 Sound active- By pressing this it puts the light in to whichever sound active mode that you have set on the fixture itself (see sound active section of this page)

Switch #3 Freeze- Will freeze on which ever color the lights are on at that moment

Switch #4 Black out- Will go dark no matter which mode you are in

Wireless Functionality: 

This light can be used wirelessly. Each wireless remote is paired with a light by using a specific frequency unique to that light. You can control several sets of lights in Master/Slave mode using one wireless remote as long as each light is hardwired together. In order for it to work properly, use the controller for the first light inthe DMX chain.

Instructions for STAND ALONE operation:

Stand Alone Preset Modes: On the T-bar, underneath the led display are 4 button. Press the mode button until the led display reads Pr.05 (number may vary).

Pr.01- Is all LED’s on at full intensity (can be changed by pressing setup and up and down to select a color, 8 different preset colors)
PR.02- Is very slow fading color change (changes color fading in another color first)
PR.03- Is a medium speed fading color change (changes color fading in another color first)
PR.04- Is a very slow color change (fades a color in and out before moving on to the next color)
PR.05- Is a quick color change
PR.06- is a slow chasing color change (brings on light on at a time and moves back and forth)
PR.07- Is a medium speed chasing color change (brings on light on at a time and moves back and forth)
PR.08- Changes color while strobing
PR.09- Fast color change while chasing back and forth
PR.10- Slow color change ( 2 outside cans change first then the 2 inside cans change)
PR.11- Medium color change ( 2 outside cans change first then the 2 inside cans change)
PR.12- Quick color change (all cans changing at different times)
PR.13- Red LED’s stay on while green LED’s chase from left to right
PR.14- Red LED’s stay on while green LED’s chase from left to right and then back from right to left 

Setting can be adjusted by pressing the setup button to SP##, Fd## or FS##. SP adjust the speed from 00-99. Fd adjust the fade time from 00-99. FS adjust the strobing speed of the function from 00-99.