Stage Ape Lighting Stage Ape Lighting



.

.

.


Home

stage ape

stage ape

Read Our Warranty
and Store Policies.

Click Here!
stage ape
stage ape The Ape PAR 56 LED S... stage ape
This product is DISCONTINUED. There are no more in stock and none available. This info is here for customers that purchased this item in the past and need details or instructions.

Short, Silver LED PAR 56 Can with 159 10mm LED's and a 35 Degree Beam Angle...

This LED PAR 56 can puts out 2,790 LUX at 1 meter. (A standard PAR 56 can with a 600 watt halogen bulb and a primary blue color gel in front of it puts out 2,270 Lux at 1 meter).

51 Red, 54 Green, 54 Blue LED’s.

Soft edge spot. Built in mic.

5 DMX channels: #1=on/off and strobe, #2=dimmer, #3=Red #4=Green #5=Blue 

Stand alone mode features: Sound active with built in mic, Auto color change.

Color temp less than 6000k. Includes 1 amp short fuse, 100,000 hour LED’s. Under  30 watt current draw.

Size 7.75" x 7.75" x 8" and weighs 2.5 Lbs.

Download the instruction manual HERE.
56LED-S
stage ape
stage ape

Lux Readings at 1 meter:


Red                304
Green            763
Blue            1,408
All On         2,790

Instructions for STAND ALONE operation:

**These LED lights can produce many different effects and colors without using a controller. Just use the dip switches on the rear of the light to mix the colors to produce brilliant shades of purple, pink, magenta and more. Each light has multiple  dip switches for each color. Make each color combinations your own to fit your event or show.** 		56LED-S
With only dip switch #1 on, the Red LED's come on at low intensity.

With only dip switch #2 on, the Red LED's come on at medium intensity.

With only dip switch #1 & #2 on, the Red LED's come on at high intensity.

With only dip switch #3 on, the Green LED's come on at low intensity.

With only dip switch #4 on, the Green LED's come on at medium intensity.

With only dip switch #3 & #4 on, the Green LED's come on at high intensity.

With only dip switch #5 on, the Blue  LED's come on at low intensity.

With only dip switch #6 on, the Blue LED's come on at medium intensity.

With only dip switch #5 & #6 on, the  Blue LED's come on at high intensity 		 56LED-S
With only dip switch #9 on, full brightness, fast pre-set color change.

With only dip switch #9 & #7 on, full brightness, slow pre-set color change.

With only dip switch #8 on, full brightness, sound active color change.		 56LED-S
DMX mode:

Set dip switches #1 & # 10 on the first fixture to the on position.
On the second fixture set dip switches #2 & #3 & #10 to the on position.

On your DMX controller:
Slider #1 is:
    0-15 = Off
    16-79 = Strobe, slow to fast
    80-159= Pulse strobe (fades out and back to bright, slow to fast)
    160-255 = On
Slider #2- Brightness, low to high (controls overall brightness).
Slider #3- Brightness of the red LED’s
Slider #4- Brightness of the green LED’s
Slider #5- Brightness of the blue LED’s

How to use this light with the American DJ MyDMX software		 56LED-S
This model is not set up for Master/Slave operation.
 56LED-S
Includes black power cord.
 LED

Back


  © 2009 by Stage Ape Lighting