Fill the 1.5 liter tank with standard (water based) fog
fluid.
There is a hose that leads from the tank out the top and leads into the
machine. Make sure it sits at the bottom of the fluid tank. Flip the
power switch at the rear of the unit on. The switch lights up
red
and begins the initial warm up time of about 5 minutes. The wired 16'
controller plugs into the 3 pin input on the rear of the unit.
Manual
Mode:
Plug
the wired remote in to the 3 pin socket on the back of the unit. A red
light on the remote will come on when the fogger has heated to ready.
Press and hold the button to dispense fog. It will stop when the burst
is done or when you let go of the button.
