 |
 |
The Lighting you need... at Prices you'll go APE over... |
|
|||||
|
|
|
Instructions for operation: |
 |
| Manual
Mode: Turn dip switch #10 to the "On" position. Control the strobe intensity and speed with the two knobs. The knob marked "Light" controls how bright the strobe's flash is. The knob marked "Speed" controls how quickly the strobe flashes at the set intensity. With the speed turned all the way down the strobe will not flash. |
 |
|
DMX mode: Part 1(single strobe) Turn just dip switch #1 on the first fixture to the "On" position. Connect the fixture to the DMX controller with a dmx cord. When the strobe is receiving a DMX signal the small green light to the left of the dip switches will be light up. Slider #1 controls speed Slider #2 controls intensity from dim to bright Slider #3 0-63 - A & B flash at the same time 63-147- Only strobe A flashes 128-191- Only strobe B flashes 192-255- Strobes A & B flash alternately (one at a time) |
 |
|
Part 2 (2 strobes on one channel) With 2 strobes lights you can use the A & B features this light has to offer. This feature allows you to alternate between fixtures or synchronize their flashes. Set both strobes dip switches to show just dip switch #1 on. Then with a controller you can use slider #3’s features to enhance your light show. |
 |
| How to use this light with the American DJ MyDMX software |  |
| Includes black power cord. |  |
