 |
 |
The Lighting you need... at Prices you'll go APE over... |
|
|||||
|
|
|
Instructions for operation: |
 |
Stand Alone mode:Set dip switches #10 and #8 to the "ON" position. |
 |
Sound Active mode:Set dip switches #10 and #7 to the "ON" position. Master/Slave mode:Set the first light to a stand alone or sound active feature. Connect the second fixture by a DMX cable. Set all dip switches to the "OFF" position on the second fixture and additional fixtures. |
 |
 |
 |
DMX mode:This light doesn't need dip switch #10 on to run DMX. Just set dip switches to the according value in your chain.Channel #1 0-7 off 8-231 strobe (slow-fast) 232-255 on Channel #2 Strobe (fast-slow) this slider gives you broader range of the strobing speeds when slider #1 is set to strobe. Channel #3 Patterns Channel #4 0-135 additional patterns 136-255 rotating patterns (channel 5 controls the speed of the rotation). |
 |
| Channel #5 Speed (fast-slow) Channel #6 Controls the red LED's (when all other channels except channel #1 are down to zero) Channel #7 Controls the green LED's (when all other channels except channel #1 are down to zero) Channel #8 Controls the blue LED's (when all other channels except channel #1 are down to zero) Channel #9 0-134 auto mode 135-255 sound active mode |
 |
How to use this light with the American DJ MyDMX software |
 |
| Includes black power cord. |
 |
