Stage Ape Lighting Stage Ape Lighting

The Lighting you need... at Prices you'll go APE over...


Home

stage ape lighting
     Contact Us:  
     
stage ape
The Ape COBRA... stage ape
DMX LED Flat Mirror Scanner with 46 5mm LED's...

16 Red, 18 Green, 12 Blue LED's. 

4 DMX Channels: #1=Dimmer/Strobe, #2=Blue, #3=Red, #4=Green.

Stand Alone mode features: Sound active with built in mic, Pattern change, Strobe, Mirror movement to sound.

Includes 1 amp short fuse. 100,000 hour led's. Under 35 watt current draw. Size 18 x 9 x 6. 4.8 Lbs.
COBRA
stage ape Click Here To Purchase stage ape

Instructions for STAND ALONE operation:

with only dip switch #1 on (down),  blue led's come on at approximately 20%


with only dip switch #2 on (down), blue led's come on at approximately 30%


with only dip switch #3 on (down),  blue led's come on at approximately 40%


with only dip switch #1 & #2 on (down), blue led's come on at approximately 60%


with only dip switch #1 & #3 on (down),  blue led's come on at approximately 70%


with only dip switch #2 & #3 on (down), blue led's come on at approximately 80%


with only dip switch #1 & #2 & #3 on (down), blue led's come on at approximately 100%

 COBRA

with only dip switch #4 on (down), red led's come on at approximately 20%


with only dip switch #5 on (down), red led's come on at approximately 30%


with only dip switch #6 on (down), red led's come on at approximately 40%


with only dip switch #4 & #5 on (down), red led's come on at approximately 60%


with only dip switch #4 & #6 on (down), red led's come on at approximately 70%


with only dip switch #5 & #6 on (down), red led's come on at approximately 80%


with only dip switch #4 & #5 & #6 on (down), red led's come on at approximately 100%

 COBRA

with only dip switch #7 on (down), green led's come on at approximately 40%


with only dip switch #8 on (down), green led's come on at approximately 50%


with only dip switch #7 & #8 on (down), green led's come on at approximately 100%

dip switch #1 & #9 initiates strobe function
with only dip switch #9 on (down), the unit changes patterns to the speed set as described below.


the speed of both of these features listed above can be controlled by combinations of dip 4 through 8. only dip switch #4 on (down) being the fastest and dip switch #4,5,6,7,8 being the slowest. The mirror is sound active through out these functions

with dip switch #3 & #9 bring all led's on at approximately 100% and the mirror is sound active.

 COBRA
For DMX Mode:

On the first fixture set the dip switches so that #1 & #10 are in the ON position. Set the sensitivity for the mirror movement to desired level (using the knob on the rear of the unit). Connect by DMX cord to controller.

Slider #1 controls the Master Dim.
Slider #2 controls the Blue LED's.
Slider #3 controls the Red LED's.
Slider #4 controls the Green LED's.

How to use this light with the American DJ MyDMX software		 COBRA
For MASTER / SLAVE Mode:

Set the MASTER head to any of the STAND ALONE settings above and then connect up to 35 additional heads with DMX linking cables and set all SLAVE heads to have only dip switch #10 & #1on (down). In this configuration, all heads will change patterns at the same time. (The mirror moves to sound independently on each head.)		 cord

Click Here To Purchase

Back


 Copyright 2009 by Stage Ape Lighting