 |
 |
The Lighting you need... at Prices you'll go APE over... |
|
|||||
|
|
|
Instructions for STAND ALONE operation: |
 |
| Auto, Strobe and Sound Active Modes: Flip through this light's options using the mode button. Use the up and down buttons until you reach Shnd. Press enter to initiate these settings. Using the up and down button you will have a few choices: sound, play and speed. Press enter while sound is on the display and the light will enter sound active mode. Press enter while the display says play and you will enter auto mode. There are 16 preset effects. ***After selecting a mode it may take a few second for a feature to kick in. Remember to press enter after you pick your selected feature to set it.*** |
 |
PL01 Brings the red LED's on. PL02 Bring the green LED's on. PL03 Brings the blue LED's on. PL04 Brings the green and red LED's on to make yellow. PL05 Brings the blue and red LED's on to make purple. PL06 Brings the green and blue LED's on to make aqua. PL07 Brings the red and blue and green LED's on to make white. PL08 Strobe in red PL09 Strobe in green PL10 Strobe in blue PL11 Strobe in yellow PL12 Strobe in purple PL13 Strobe in aqua PL14 Strobe in white PL15 RGB color change PL16 Rotate through all 8 colors ***The speed of the strobe and color change features can be adjusted by using up and down buttons in the Shnd menu. Find speed and press enter. Then adjust it to the desired level, then press enter to initialize. 0 being the slowest and 8 being the fastest.*** |
 |
| DMX mode: Flip through the lights options using the mode button. Use the up and down buttons until you reach Addr. Press enter to initiate this setting. Using the up and down button to select the correct DMX address. Channel #1 0-255 controls the red LED's dim to bright. Channel #2 0-255 controls the green LED's dim to bright. Channel #3 0-255 controls the blue LED's dim to bright. Channel #4 0-255 controls the preset color change, slow to fast change. Channel #5 0-133 nothing 134-255 strobe dim to fast (must have a color set using channels 1-3). Channel #6 0-255 master dim (dim to bright) this option must be on for other features to work. How to use this light with the American DJ MyDMX software |
 |
| Mater/Slave Mode: Flip through the options using the mode button. Use the up and down buttons until you reach Slnd. After pressing enter either mast or slav will be blinking. On the first (master) fixture select mast. Connect the remaining fixtures using a DMX cable. Then repeat this process only select slav for these other fixtures. Now on the master fixture pick an auto mode function (see above) the rest of the lights will copy the master fixture.  |
  |
| Includes black power cord. |
 |
