Stage Ape Lighting Stage Ape Lighting

The Lighting you need... at Prices you'll go APE over...


Home

stage ape lighting
     Contact Us:  
     
stage ape
stage ape The Ape FREEDOM... stage ape

NEW BATTERY POWERED LED can!! Includes 120 volt power supply!

Short, Black LED PAR 38 Can with 6 (1 watt) LED's and a 35 Degree Beam Angle. Soft edge spot. This LED PAR 38 can puts out more light than a standard PAR 38 can with a 120 watt halogen bulb with a color gel in front of it. This fixture recharges while it is plugged into the wall. On/off power switch on rear. Red/Green indicator light on rear shows the recharge status. Red means charging and green means it’s ready.

4 channel dmx: #1=on/off, dimmer and strobe, #2=Blue, #3=Red, #4=Green. Stand alone mode features: Sound active with built-in mic, auto color change and master/slave mode. Color temp less than 6000k. Includes 1 amp short fuse, 100,000 hour LED’s.

Size: 4.75" x 4.75" x 3.5" and weighs 1.7 Lbs

led cans

stage ape Click Here To Purchase stage ape

How To:

This fixture recharges while it is plugged into the wall. The on/off power switch is located on the rear of the unit. The red/Green indicator light on rear shows the recharge status. Red means charging and green means it’s ready. It has a battery life of 5-7 hours with all 3 colors (6 LED's) at full intensity and 8-12 hours with only 1 color (only 2 LED's) at full intensity.







side led 86 can

Instructions for STAND ALONE operation:

With only switch#1 on (up), the Green LED's come on at approximately 20% brightness.

With only switch#2 on (up), the Green LED's come on at approximately 30% brightness.

With only switch#3 on (up), the Green LED's come on at approximately 40% brightness.

With only switch#1 & #2 on (up), the Green LED's come on at approximately 60% brightness.

With only switch#2 & #3 on (up), the Green LED's come on at approximately 80% brightness.

With only switch#1 & #2 & #3 on (up), the Green LED's come on at approximately 100% brightness.

With only switch#4 on (up), the Red LED's come on at approximately 20% brightness.

With only switch#5 on (up), the Red LED's come on at approximately 30% brightness.

With only switch#6 on (up), the Red LED's come on at approximately 40% brightness.

 front led 86 can
With only switch#4 & #5 on (up), the Red LED's come on at approximately 60% brightness.

With only switch#5 & #6 on (up), the Red LED's come on at approximately 80% brightness.

With only switch#4 & #5 & #6 on (up), the Red LED's come on at approximately 100% brightness.

With only switch#7 on (up), the Blue LED's come on at approximately 35% brightness.

With only switch#8 on (up), the Blue LED's come on at approximately 65% brightness.

With only switch#7 & #8 on (up), the Blue LED's come on at approximately 100% brightness.

With only switch#9 & #2 on (up), the light strobes with Red, Blue and Green LED's on. Use dip switches #4,5,6,7,8 to control the speed of strobe.

With only switch#9 & #3 on (up), the changes color the sound.		 side led 86 can
DMX mode:

Dip switch #10 must be on for DMX mode to work.

Slider #1- 0-127 Brightness, low to high (controls overall brightness).
                128-249 Strobe from slow to fast
                250-255 On
Slider #2- Brightness of the Blue LED’s
Slider #3- Brightness of the Red LED’s
Slider #4- Brightness of the Green LED’s

How to use this light with the American DJ MyDMX software		 back led 86 can

Master/Slave:


Set dip switches #1-8 on the master fixture to the desired numerical value. Connect the second fixture by DMX cord.
Then set dip switch #10 of the slave fixture to the "On" position.

 120-LED86

Click Here To Purchase

Back


 Copyright 2010 by Stage Ape Lighting