 |
 |
The Lighting you need... at Prices you'll go APE over... |
|
|||||
|
|
|
Instructions for Operation: |
 |
| Auto Mode: Use the mode button to scroll through the modes. For auto mode keep pressing the mode button until one of the four settings (Colo=color, Gobo=gobo, Self=gobo auto rotation and Shy=x,y movement)is displayed. Press func button to enter settings mode. You must set each one of these four settings to your desired settings for this light to work best in auto mode. When you find to your desired setting make sure to press the func button to initialize your setting. There is an indicator light at the bottom right of the display screen, it will stop blinking when mode is set. If you do not hit the func button the light will default to its last setting. Sound mode: Use the mode button to scroll through the modes until the display reads Soud. Press the func button to initialize sound active mode. |
  |
| DMX mode: Use the mode button to scroll through the modes until you reach 512 on the display. Press the func button to enter DMX addressing mode. Use the up and down buttons to select the lights address. then press the func button again to lock it in. Channel #1 0-7 Off 8-231 Strobe fast to slow 232-255 On Channel #2 0-255 Dimming (must be on/up for the light to come on Channel #3 0-255 Controls movement on X-axis 450 degrees Channel #4 0-255 Controls movement on Y-axis 270 degrees Channel #5 0-255 X-axis adjust (small movement) Channel #6 0-255 Y-axis adjust (small movement) Channel #7 0-8 Nothing 9-255 X,Y movement speed from fast to slow Channel #8 0-255 Color Channel #9 0-255 Gobo Channel #10 0-255 Gobo adjust (rotates gobo in a single rotation) Channel #11 0-119 Gobo rotation counter-clockwise from fast to slow 120-255 Gobo rotation clockwise from slow to fast Channel #12 0-79 Nothing 80-199 Auto mode (changes every 3 seconds) 200-245 Auto mode freeze 246-255 Will revert back to original setting How to use this light with the American DJ MyDMX software |
 |
| Master/slave
mode: Use the mode button to scroll through the modes until you reach 512 on the display. Press the func button to enter DMX addressing mode. Use the up and down buttons to select the light's address to A001 for all slave lights. Then press the func button again to lock it in. Connect the lights with DMX cables. On the Master fixture pick a stand alone feature. The lights will then move at once. |
  |
 |
