Stage Ape Lighting Stage Ape Lighting

The Lighting you need... at Prices you'll go APE over...


Home

stage ape lighting
     Contact Us:  
     
stage ape
stage ape The Ape PHOENIX... stage ape
DMX flat mirror scanner with a bright, 250 watt, ELC bulb...

4 DMX channels.

8 gobos with set colors plus open.  24 volt 250 watt ELC bulb. 300 watt power consumption.

Unit size 17" x 6.5" x 6" and weighs 14.8 Lbs

Modes: DMX, sound active, slow running, fast running and master slave.



 phoenix

stage ape Click Here To Purchase stage ape

Instructions for operation:

DMX MODE:

Set Digital dip to read A001 for the first fixture. These are 4 channel lights so set the second fixture to read A005. Go up in 4 for each of your next fixtures.
 side phoenix
Channel #1 = Controls Gobos

0-5 = Lamp off
6-11= Lamp on
12-17= Gobo 1
18-23= Gobo 2
24-29= Gobo 3
30-35= Gobo 4
36-41= Gobo 5
42-47= Gobo 6
48-53= Gobo 7
54-59= Gobo 8
60-65= Gobo 1 and 2 switch back and forth
66-71= Gobo 2 and 3 switch back and forth
72-77= Gobo 3 and 4 switch back and forth
78-83= Gobo 4 and 5 switch back and forth
84-89= Gobo 5 and 6 switch back and forth
90-95= Gobo 6 and 7 switch back and forth
96-101= Gobo 7 and 8 switch back and forth
102-171= Gobo wheel rotate fast to slow
172-251= Strobe slow to fast
252-255 = Open

 phoenix
Channel #2 = Pan
Channel #3 = Tilt
Channel #4 = Light control
0-7= Lamp off
8-247= Lamp on
248-255 = Auto mode changes mirror position every 5 seconds

How to use this light with the American DJ MyDMX software
 phoenix
Stand Alone:

For sound active mode set the digital display to show (G-1-)
For slow running mode set the digital display to show (G-2-)
For fast running mode set the digital display to show (G-3-)
Set the digital display to (G-4-) for black out. (the light goes dark but the scanner is still on, use this so the light doesn’t have to go through it’s boot up phase).
 phoenix

Master Slave:


Set the digital display on the first (master) fixture to any stand alone mode (G-1-, G-2-, G-3-). Link  all the fixtures together by dmx cord. Then set the digital display on the 2nd fixture to read (S-1-). If you want every fixture doing the exact same thing, set all other slaves to read (S-1-) on the digital display. Another feature of master/slave mode is to have the mirror on the scanners sync up and move together as well as move separate ways, while the colors remain the same. This mode works in groups of 4 scanners. Again set the digital display on the first (master) fixture to any stand alone mode (G-1-, G-2-, G-3-). Then set the first slave to read (S-2-), the third to (S-3-), and the fourth to (S-4-)
 phoenix
Includes black power cord. 127 London

Click Here To Purchase

Back


 Copyright 2009 by Stage Ape Lighting